Robot Millennium - Liste des erreurs pendant l'analyse de la structure

Robot Millennium - Liste des erreurs

ROBOT Millennium
Liste des erreurs pendant l'analyse de la structure

La liste ci-dessous contient les numéros des erreurs pouvant se produire lors des calculs de la structure.

100 Improper node number
101 Improper element number
102 Not enough memory

----------CABLES

300 Not enough memory while analyzing cable elements
301 Not enough memory while analyzing cable elements
302 Not enough memory while analyzing cable elements
303 Not enough memory while analyzing cable elements
304 Not enough memory while analyzing cable elements
305 Output error while storing results for cable elements

-----------ERRORS IN I/O SYSTEM

500 Internal error while handling file names
501 Internal error while handling file names
502 Internal error while handling file names
503 Internal error while handling file names
504 Data error, data files corrupted
505 Not enough memory to run the job
506 Data error, no information about load cases
507 Inconsistent data about compatible nodes
508 Internal error while analyzing rigid links
509 Internal error while analyzing rotated nodes
510 Internal error while analyzing rotated nodes
511 Internal error while analyzing elastic supports
512 Internal error while analyzing elastic supports
513 Internal error while analyzing compatibilities
514 Internal error while analyzing elastic compatibilities
690 Internal error while analyzing rigid links

---------- MODAL ANALYSIS

900 Input error while reading temporary results in modal analysis
901 Output error while storing results of modal analysis
902 Negative eigenvalue has been obtained
903 Not enough memory while analyzing concentrated node weights
904 Not enough memory while analyzing concentrated node weights
905 Internal error while analyzing concentrated node weights

-----------SPECTRAL ANALYSIS

920 Input error while reading temporary results during spectral or seismic analysis
921 Output error while storing results of spectral or seismic analysis
922 Input error while reading temporary results during spectral or seismic analysis
923 Output error while storing results of spectral or seismic analysis
924 Internal error during spectral or seismic analysis
925 Output error while storing results of spectral or seismic analysis
930 Error during saving damping and energy results
940 Data error in seismic analysis
950 Not enough memory to load spectrum in spectral analysis
951 Data error in spectral analysis

-----------TRANSIENT ANALYSIS

960 Internal error in transient analysis
961 Data error in transient analysis, invalid configuration file
962 Data error in transient analysis, invalid time step
970 Internal error in transient analysis
971 Data error in transient analysis, formula incorrect
972 Data error in transient analysis
973 Data error in transient analysis
974 Output error while storing results of transient analysis
980 Not enough memory in transient analysis
981 Not enough memory in transient analysis
982 Data error in transient analysis
983 Data error in transient analysis
984 Data error in transient analysis
985 Data error in transient analysis
986 Data error in transient analysis

---------- MEMORY

1000 Not enough memory to run the job
1001 Not enough memory to run the job
1010 Output error while storing results for finite elements
1011 Not enough memory to run the job
1100 Not enough memory to run the job, problem too big
1101 Not enough memory to run the job, problem too big
1102 Not enough memory to run the job, problem too big
1103 Not enough memory to run the job, problem too big
1104 Not enough memory, too many isolated nodes

---------- FE RESULTS

1230 Input error while reading temporary results for finite elements
1231 Output error while storing temporary results for finite elements

-----------FRONTAL SOLVER

1310 Output error while writing to a scratch file during frontal analysis
1311 I/O error while opening a scratch file during frontal analysis
1320 Input error while reading from a scratch file during frontal analysis
1321 I/O error while opening a scratch file during frontal analysis
1330 Output error while storing a matrix during frontal analysis
1340 Not enough memory during frontal analysis
1350 Internal error while opening a scratch file during frontal analysis
1360 Not enough memory during frontal analysis
1361 Not enough memory during frontal analysis
1370 Internal error in frontal analysis, too big problem
1400 Not enough memory for a matrix buffer
1401 Input error while reading in a matrix

-----------MEMORY

1410 Not enough memory for an eigenproblem buffer
1420 Not enough memory to run the job, reduce problem size
1421 Not enough memory to run the job, reduce problem size
1422 Not enough memory to run the job, reduce problem size

---------- EIGENVALUE PROBLEM

1430 Internal error during eigenproblem analysis
1431 Not enough memory during eigenproblem analysis
1450 Not enough memory during eigenproblem analysis
1451 Output error while storing results of eigenproblem analysis

-----------SKYLINE SOLVER

1900 Internal error in skyline solver, switch to frontal method if possible
1901 Output error while storing a matrix in skyline solver
1902 Output error while storing a matrix in skyline solver
1903 Not enough memory in skyline solver
1904 Input error while reading in a matrix in skyline solver
1905 Input error while reading in a matrix in skyline solver
1906 Output error while storing a matrix in skyline solver
1920 Not enough memory to run the job
1921 Not enough memory to run the job
1922 Not enough memory to run the job
1923 Not enough memory to run the job
1930 Execution problem while opening a scratch file during skyline analysis
1940 Input error while reading in a matrix in skyline solver
1941 Input error while reading in a matrix in skyline solver
1950 Input error while reading in a matrix in skyline solver
1951 Input error while reading in a matrix in skyline solver
1960 Internal error in skyline solver
2010 Not enough memory to run the job
2011 Input error while reading in a matrix in skyline solver
2020 Internal error in skyline solver
2021 Input error while reading in a matrix in skyline solver
2030 Internal error in skyline solver
2031 Output error while saving matrix on disk
2040 Internal error in skyline solver
2041 Input error while reading in a matrix in skyline solver
2050 Input error while reading in a matrix in skyline solver

-----------EIGENVALUE PROBLEM

2051 Not enough memory during eigenproblem analysis
2052 Execution problem during eigenproblem analysis, zero elements on stiffness matrix diagonal
2053 Execution problem during eigenproblem analysis, zero eigenvalue calculated
2054 Execution problem, missing eigenvalue(s)
2055 Not enough memory during eigenproblem analysis
2070 Execution problem during eigenproblem analysis
2080 Internal error during eigenproblem analysis
2081 Not enough memory during eigenproblem analysis
2082 Execution problem during eigenproblem analysis, modelization error
2083 Execution problem during eigenproblem analysis, modelization error
2084 Execution problem during eigenproblem analysis
2085 Execution problem during eigenproblem analysis
2086 Execution problem during eigenproblem analysis
2095 Execution problem during eigenproblem analysis
2110 Data error, linear load without effect (zero segment length) in surface load definition
2120 Data error, data file of load records is corrupted
2300 Internal error while handling element reactions
2400 Not enough memory for a section buffer
2500 Not enough memory for a scratch buffer
2505 Internal error, invalid pointer reference
2520 Output error while storing results on disk
2521 Internal error, invalid pointer reference

---------- EIGENVALUE PROBLEM

2540 I/O error while opening a scratch file during eigenproblem analysis
2550 Internal error while reading from a scratch file during eigenproblem analysis
2551 Input error while reading from a scratch file during eigenproblem analysis
2560 Internal error while writing to a scratch file during eigenproblem analysis
2561 Output error while writing to a scratch file during eigenproblem analysis
2570 Internal error during eigenproblem analysis
2571 Internal error during eigenproblem analysis
2572 Output error while writing to a scratch file during eigenproblem analysis
2573 Input error while reading from a scratch file during eigenproblem analysis
2580 Internal error during eigenproblem analysis
2590 Internal error during eigenproblem analysis
2650 Data error while analyzing unilateral constraints, load at unsupported node

-----------THE MODAL DECOMPOSITION METHOD

2701 Data error while Modal Decomposition Method
2702 Data error while Modal Decomposition Method
2703 Data error while Modal Decomposition Method
2704 Data error while Modal Decomposition Method

-----------THE LANCZOS METHOD

2800 Data error while Lanczos Method
2801 Internal error during Lanczos Method; does not used now (Lanc_Ritz_Ort_Type)
2802 Internal error during Lanczos Method; does not used now (Lanc_Ritz_Ort_Type)
2803 Internal error during Lanczos Method: Number of required Ritz vectors > current Lanczos step
2804 Memory allocation problem during Lanczos method
2805 Error caused by open the files for additional I/O system
2806 Error caused by read/write for additional file system
2807 Error for additional I/O system: the array, connected with Buff, is not allocated
2808 Error caused by i > j for param. Tau_3;
2809 Convergence is not achieved for QR iterations - mode's definition. Possible - lack of positive definition of K
2810 Execution problem caused by divide to zero for back_go. Possible - lack of positive definition of K
2811 Execution problem caused by divide to zero for TR_Transf. Possible - lack of positive definition of K

-----------THE BASIS REDUCTION METHOD

2850 Allocation error during Basis Reduction Method
2851 Jacobi problem during Basis Reduction Method: possible, incorrect allocation of master degrees of freedom
2852 Source data error: number of required modes > number of master degrees of freedom
2653 Basis Reduction Method Error: leak of symmetry of reduced influence & mass matrices. Possible of incorrect allocation of master degrees of freedom or ill conditioned stiffness matrix due to gross errors in FEM model

----------THE ITERATIVE SOLVER ERRORS

3000 Memory allocation error
3001 Open additional output file error =3002, // zero length of current element: ELE_MatrEvaluation returns 0
3002 Too much aggregation levels - reduction not possible - reduce the number of aggregation levels
3010 Error during Iterative Solver execution
3011 Internal error
3012 Internal error
3013 Error during Iter. Solver Execution: j<i
3014 Open file error during Iter. Solver
3015 I/O error during ITER_SOLV execution
3016 Error during Iter. Solver Execution
3017 This method is not available
3018 Neq_Old != Last Neq during renumeration
3019 Number of blocks nblck > MAX_BLOCKS for Kc
3020 I/O error during coarse matrix operations with file
3021 Compatible node is set at support; temporary it is impossible
3050 Memory allocation error during ITER_Eigen
3060 Runtime error during Jacobi fo ITER_Eigen
3061 Iterative solver: number of required modes > MAX_SIZE_SUBSP_PROB
3065 There is impossible to apply the PCG_Ritz method when nModes = 1 (Should be: nModes > 1)
3070 Runtime error during aggregation of coarse level model: slave node occurs as a first node into aggregate
3080 Runtime error during correctness control: any nodes are not contained into any aggregates
3090 The flat stress-strain state elements are not available
3200 Error during open file for I/O system
3210 Block subspace iteration method will be ineffective. Choose the different method
3220 Blocksize error during block subspace iteration method - internal error
3230 Nonpositive defined mass matrix error: (V*M*V) <= 0
3240 Too many modes: lastvect > NoOfLegalDOF

----------THE SPARSE SOLVER ERRORS

3300 Open file error
3301 Init class CSparse for sparse direct solver
3302 Number of equation in front is zero
3303 Internal run error during estimation of memory
3304 Internal run error during symbolical factorization
3305 Internal run error during resolution stage
3305 Internal run error during symbolical factorization
3306 I/O error during storage of decomposed part of matrix
3307 Insufficient memory during run
3308 Skipped element during step = 0
3309 Errors during run
3310 Error during open file for matrix factor
3311 Number of required r.h.s > number of computed r.h.s
3312 Error during init of second matrix
3313 Inadmissible type of solver
3320 Error during initialization of adjacency graph
3321 Unknown reordering method
3322 Error during MDA reordering
3323 Error during multifrontal solver
3324 Too many prev. fronts - multifrontal solver
3325 Create new front error
3326 Aggregate front error
3327 Prepare front error
3328 Set decomposed part error
3329 Error during multifrontal solver - renum. NDM
5000 General page fault (if possible, save the example and send it to technical support)